BHFS-5-16A/80, 16 mm² Busbar, Slide Contact Line System
Conductive Conduit Shells made by superior insulation and flame retardant material ensure safe and reliable use. Plug in type connection of Conductive Conduits makes installation, replacement, maintenance conveniently and quickly.
Features
* Safety: It is wind-proof, rain-proof and snow-proof. The good insulation performance ensures no harm to the maintenance personnel when they touch the contact conduits.
* Reliability: The conductive rails are with excellent conductivity, rapid heat dissipation, low impedance and line loss. The brushes are with high conductivity and high wear resistance.
* Economy: Its length can be added or reduced according to the height of hoist mast, the conductive conduits can be segmented replaced, no need to change the whole cable in the case of local damage.
* Convenience: Its Coductive Conduit Fasteners, connecting clamps and Anti-drop Device, etc. are provided with common components, very easy to assemble/dismantle, commissioning and repair.
Technical Data
SR. NO. | ITEM | PARAMETER |
1 | Rated Current | 80A |
2 | Rated Voltage | 380V |
3 | Power Supply Mode | Three-phase Five-wire |
4 | Dimension | 3016x60x54 mm |
5 | Weight | 7.2kg |
6 | Insulation Resistance | ≥ 0.5MΩ |
7 | Dielectric Strength | AC 3750V, no breakdown or flickering in 1 minute |
8 | Protection Grade of Shell | IP23 |
9 | Electrothermal Stability | 20 times/rated 1 s |
10 | Rated Short-time Withstand Current & Rated Peak Withstand Current | 4.5KA / 6.75KA |
11 | Ambient Features | 1, Heat Resistance Test: Normal Type +55 ℃ |
2, Low Temperature Resistance Test: -30 ℃ | ||
3, Heat and Humidity Resistance Test: Relative Humidity 95%, +25 ℃ | ||
4, Atmospheric Pressure: 86~106 KPa | ||
12 | Flame Resistance | V0 (Self Extinguishing) |
13 | Parameter of Transmission Line | Compliant with National Standard GB/T3048 <cable conductor>; |
Resistance ≤ 0.028 Ωmm²/m ( +20 ℃) | ||
14 | Current Collector | Traction Force: F < 80N; |
Traveling Speed: V ≤ 100 m/min | ||
15 | Electric Brush Parameter | Abrasion after operating 2000km: < 0.8 mm; |
Effective Abrasion of Brush: 5~7 mm; | ||
Effective Working Pressure: 1.8~4.08 N/cm² |